Intro

Features

-
Customized design
A wide range of options, metallic, glossy, transparent, natural, oiled or varnished, with a customization of the feel of the coating, from more natural looking treatments to high coverage paint.

-
Exterior and interior wood
Wood, from an aesthetic and decorative point of view, stands out for its nobility, besides being the only material resistant to natural aging and extreme weather conditions.

-
Protection of joints and headers
The corner joints of windows are always exposed to high stresses. Our elastic sealing protects structural points that are particularly vulnerable to attack.

-
Protection against moisture and fungi
Our treatments to keep the wood breathable prevent the formation of fungi and bacteria, which guarantees more hygienic walls against rotting and a preservation of the protective layer against blue stain fungus.

-
Protection against insects
Provided with preventive treatments against insects including termites to protect it from possible attacks.

-
Optimal insulating effect
Wood has a higher capacity as a thermal insulator. Depending on the species, it is on average 15 times higher than a concrete wall. On a wall 20 mm of wood insulates like a 300 mm concrete wall.

-
Protection against ultraviolet rays
UV filter windows prevent this side effect of the sun through the use of laminated glass. This filter also provides solar protection to the wood, preventing discoloration due to the action of the sun.

-
High permanent elasticity
Hygro-thermo-viscous material, its mechanical behavior is ideally elastic and the elastic response of our profiles attends to the perfect balance between moisture content, temperature and its durability superior to any other material.

-
Protection against cold and water stains
The natural treatments of our profiles are designed for long-term preservation from cold and humidity with optimal drying processes at 21°C.

-
Scratch and hand cream resistant varnishes
We optimize the protection of our woods by using the best water-based treatments on the market, with high quality and long-lasting finishes with hyper-matte finishes and anti-scratch properties.
Wood for every taste

Chestnut

Cedar

Iroko

Pine

Oak

Sipo

Profile
Downloads
-
Prescription text
Lightek Madera 68mm
- Hidden Leaf wood window in exterior joinery, Lightek 68 system from “Carpintek”.
- Timber _____ (Pine, Iroko, Chestnut)
- Finger-joint (C1/C2 or solid wood)
- Finishing in color _____ (color reference)
- Opening _____ (type of opening)
- Dimensions _____
- Leaf profile 63×68 mm with a glass capacity of 28-48 mm.
- Frame profile 80×86 mm
- Glazing beads (straight or molded) with pneumatic nailer fixing or glazing bead fixing system with Olimpia perimeter screw clip.
- Smooth or molded framings (solid wood or waterproof MDF on the inside, solid wood only on the outside). Different sizes (70×10, 70×12, 90×10, 90×12, and possibility of making other sizes).
- Thermal transmittance of the frame section type Uw = 0.83 W/(m²K)
- Sound insulation from 35 Rw (dB) to 50 Rw (dB). It varies according to the type of wood (soft, hard, etc.) and the glass used.
- Air permeability CLASS 4 according to UNE EN 1026 (2001), watertightness CLASS 9A according to UNE EN 1027 (2001), wind load resistance CLASS C 4.
- Finish ____ (specify type of finish, type of technology, type of protection, number of layers)
- Perimeter locking fittings and rebate lever ZH on passive leaf, vandal-proof groove Aire12 and 13 mm of GU brand. With security level _____
- Wooden pre-frame 75×30 mm (manufactured or already installed)
- Fixing the frame to the pre-frame with galvanized steel screws with cylindrical head;
- installation of a pre-compressed polyurethane foam sealing strip, impregnated with synthetic resin, with rainwater tightness for pressures up to 600 Pa; for thermo-acoustic insulation;
- or GU polyurethane foam with GU hollow core sealing cord on the outside and inside. Sealing of the external joint between the frame and the building with neutral silicone to guarantee air and water tightness.
- Direct wall mounting: Mechanical fixing by means of galvanized cylinder head screws for direct fixing to compact materials of 7 x 120 mm and Torx head placed at a maximum distance of 600 mm from each other.
- Fastening to the substructure, on the inside, with perimeter flashing, using 1K mounting adhesive.
Lightek Aluminio 68mm
- Wood-aluminum window assembled on the same plane, with hidden sash in exterior joinery, Lightek 68 system from “Carpintek”.
- Timber _____ (Pine, Iroko, Chestnut)
- Finger-joint (C1/C2 or solid wood)
- Finishing in color _____ (color reference)
- Opening _____ (type of opening)
- Dimensions _____
- Leaf profile 63×68 mm with a glass capacity of 28-48 mm.
- Frame profile 80×86 mm
- Glazing beads (straight or molded) with pneumatic nailer fixing or glazing bead fixing system with Olimpia perimeter screw clip.
- Smooth or molded flashings (solid wood or waterproof MDF on the inside, solid wood only on the outside). Different sizes (70×10, 70×12, 90×10, 90×12, and possibility of making other sizes).
- Thermal transmittance of the frame section type Uw = 0.83 W/(m²K)
- Sound insulation from 35 Rw (dB) to 50 Rw (dB). It varies according to the type of wood (soft, hard, etc.) and the glass used.
- Air permeability CLASS 4 according to UNE EN 1026 (2001), watertightness CLASS 9A according to UNE EN 1027 (2001), wind load resistance CLASS C 4.
- Finish ____ (specify type of finish, type of technology, type of protection, number of layers)
- Perimeter locking fittings and rebate lever ZH on passive leaf, vandal-proof groove Aire12 and 13 mm of GU brand. With security level _____
- Wooden pre-frame 75×30 mm (manufactured or already installed)
- Fixing the frame to the pre-frame with galvanized steel screws with cylindrical head;
- installation of a pre-compressed polyurethane foam sealing strip, impregnated with synthetic resin, with rainwater tightness for pressures up to 600 Pa; for thermo-acoustic insulation;
- or GU polyurethane foam with GU hollow core sealing cord on the outside and inside. Sealing of the external joint between the frame and the building with neutral silicone to guarantee air and water tightness.
- Direct wall mounting: Mechanical fixing by means of galvanized cylinder head screws for direct fixing to compact materials of 7 x 120 mm and Torx head placed at a maximum distance of 600 mm from each other.
- Fastening to the substructure, on the inside, with perimeter flashing, using 1K mounting adhesive.